fot
[Top] [All Lists]

Re: [Fot] Small Open Trailer for sale

To: tony@tonydrews.com, fot@autox.team.net
Subject: Re: [Fot] Small Open Trailer for sale
From: N197TR4@cs.com
Date: Sat, 13 Jan 2007 14:59:13 EST
I recommend that trailer...it is quite well done and was custom built for an 
ALFA ROMEO collector/show car. I towed that trailer for a lot of miles.

> I'm upgrading trailers, and need to sell my current trailer.  I 
> thought I'd offer it here before I try the e-bay route.  I'd like to 
> get $600 for it.  It's a single axle trailer.  It has 3 brand new 
> good trailer tires.  The two main wheels are decent looking mags, the 
> spare is a steel wheel with a hubcap  to dress it up.  It has surge 
> brakes, but they don't work and are disabled.  I had planned to 
> install electric brakes but never got around to it.  With my current 
> tow vehicle (Astro Van), the lack of trailer brakes hasn't been a big 
> issue.  I have been using it to bring my TR-4 to and from the 
> track.  It would fit a TR-6, TR-4, TR-3 and probably a Spit or 
> GT-6.  Maximum tread width of vehicle is 59 1/4".  The total length 
> of the car area is 143", the front wheel stop is 17" from the 
> front.  The fenders are a bit over an inch outboard of the tire 
> tracks, so the vehicle body width is limited to something like 
> 61"  It's fairly low to the ground, and has a low approach angle with 
> the included ramps.  Lights work.  It's a nice home built trailer 
> made by a guy who did stock car trailers, I think.  You hardly know 
> it's back there when towing other than somewhat increased stopping distances.
> 
> Crude dimensional drawing and pictures available upon 
> request.  Pictures will show a hand winch, but I'm keeping that for 
> the next trailer.
> 
> I'd help with delivery within a reasonable range from Moline, 
> Illinois for travel expense costs.
> 
> - Tony Drews
_______________________________________________
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>