fot
[Top] [All Lists]

Re: [Fot] diff

To: riverside <riverside@cedar-rapids.net>
Subject: Re: [Fot] diff
From: Bill Babcock <billb@bnj.com>
Date: Thu, 25 Jan 2007 10:19:29 -1000
Sounds like people are being a bit "elegant" about their diff  
welding. I have one for Peyote that I can't imagine ever breaking  
(especially since it's sitting on a shelf. The spider gears are  
hardly visible under the weld, which was obvously applied with a huge  
welder that enabled deep penetration of the heavy parts. the bead is  
about 3/4 of an inch wide.
On Jan 25, 2007, at 9:30 AM, riverside wrote:

> Used Greg's technique for welding up my TR3
> diff and never had a failure. Sort of stumbled on
> it after welding things up solid and having the
> welds fail without additional damage. Car was
> still hard to drive on the pace lap, but having
> the outside wheel always powered was well
> worth it.
>
> art d
> _______________________________________________
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>