fot
[Top] [All Lists]

Re: [Fot] Lever shock mounts

To: "Don Elliott" <58tr3a@videotron.ca>
Subject: Re: [Fot] Lever shock mounts
From: rjl6n@cstone.net
Date: Mon, 4 Aug 2008 14:26:00 -0400 (EDT)
<snip>

> I found it difficult to get a socket on the hex head because there is so
> little clearance between the socket and the recessed part of the casting
> for the shock body.

I made a tool for this - I took a Snap-On socket
and turned down the outer diameter until it fit
on the recess.

John
_______________________________________________
http://www.team.net/donate.html

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>