[Top] [All Lists]

Re: [Fot] Brake/clutch fluid res.

To: BMCU Membership <>
Subject: Re: [Fot] Brake/clutch fluid res.
From: "Randall" <>
Date: Wed, 24 Sep 2008 09:20:22 -0700

> and find your leak, then solder it.

That in itself is tricky with the original TR3 reservoir.  It's soldered
together (with low temperature 'soft' solder) to begin with.  So bringing
one spot to soldering temperature will soften the adjacent solder joint and
allow it to pull apart, etc.

I gave up and found another one that didn't leak.


Support Team.Net

Fot mailing list

<Prev in Thread] Current Thread [Next in Thread>