I need to change the main bearings in my TR4. The engine is in the
car with the gearbox attached. Is it possible to pull the rear main
cap? I'm specifically concerned about the seal - I have the new
split-type seal. I took lots of pix of the engine as I assembled it
*except* the split seal and associated bits.
TIA
jim
--
J.C. Hassall
Blacksburg VA
'63 TR4 in autox preparation
96% finished, 90% to go
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|