fot
[Top] [All Lists]

Re: [Fot] weber fuel pump query

To: fot@autox.team.net
Subject: Re: [Fot] weber fuel pump query
From: Guyots3@wmconnect.com
Date: Wed, 7 Jan 2009 02:25:43 EST
In a message dated 1/5/2009 6:24:42 PM Pacific Standard Time,
fot-request@autox.team.net writes:

> Date: Tue, 6 Jan 2009 10:09:20 +1000
> From: "Terry and Cindy" <roadandtrack@bigpond.com>
> Subject: Re: [Fot] weber fuel pump query
> To: <fot@autox.team.net>
> Message-ID:
>     <20090106000922.NAJC14268.nschwotgx02p.mx.bigpond.com@Rat01>
> Content-Type: text/plain; charset="us-ascii"
>
> My research indicates that for triple webers, I should use a Carter pump.
It
> seems there are 2 models FMP60430 & FMP4070 , both having 4-6PSI delivery
> but with differing flow rates. It appears an external regulator is not
> needed with either of these.  Does anyone have a counter view based on
> experiences.
> Thanks
> Terry O'Beirne
>
> Hi Terry,


I know nothing about Carter fuel pumps.

I have been using Facet Silver Top Competition Unit  part #  480530 for some
years now, with no issues.

I also use a Malpassi Filter King Fuel Regulator, (the one without the
filter)

I would NOT use a Triple Webers without an adjustable fuel regulator.

I use a Stewart Warner electric Fuel Pressure gauge to keep an eye on what is
happening.

Ideal fuel pressure for my set-up seems to be between 1= - 2= psi depending
on whether I am driving in town or on the interstate, (my car is a fast road
rather than a race car).

For filters, I use the glass cylinders with renewable nylon filters, although
for race use you may prefer to use something without glass, but I advise to
avoid paper filters.

Regards

Leon F Guyot

<A
HREF="http://community.webshots.com/user/vitesse1963";>http://community.websho
ts.com/user/vitesse1963</A>
_______________________________________________
Support Team.Net http://www.team.net/donate.html

http://www.fot-racing.com

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>