At 08:38 PM 6/2/2009, Dlhogye@aol.com wrote:
>Hello Fot,
> I'm beginning to set up the front suspension of my TR3 for racing. Is it
>possible to use a TR6 trunnion and bushing kit on TR3 lower control arms.
>It is my understanding that the TR6 trunnion lowers the front about an inch.
>Of course the upper arms from TR4A-TR6 would be used. Also, does anyone know
>if it's possible to flip the TR3 lower control arms to lower the front. I
>can see that doing so would lower the front, about a half inch, this also
>lowers the spring pan. Does anyone have any tips for this type of set up?
> Thanks,
> Dave H.
Dave, FWIW, I flipped the lower control arms on my TR4, which lowered
the car about an inch. I ran across this in a book called "How to
Improve the TR2-TR4". I know, the title is heresy, but it had some good poop.
jim
--
J.C. Hassall
Blacksburg VA
'63 TR4 in autox preparation
96% finished, 90% to go
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|