fot
[Top] [All Lists]

Re: [Fot] 1955 LeMan and TRIUMP...

To: BillDentin@aol.com
Subject: Re: [Fot] 1955 LeMan and TRIUMP...
From: Bill Babcock <billb@bnj.com>
Date: Mon, 8 Nov 2010 13:18:08 -0800
Very impressive. But you don't need overdrive to hit 120. A 3.45 rear end will
do that nicely. The problem is the aero--a TR2/3 is about as streamlined as a
barn door.


On Nov 8, 2010, at 9:45 AM, BillDentin@aol.com wrote:

> Amici...
>
> Paul Richardson has another nice article in the current issue of TRIUMPH
> WORLD, this one about TRIUMPH's participation in the 1955 race at LeMan.
> Recall that is the race which had the terrible accident involving a Mercedes
and
> an Austin Healey, 80 deaths and many more injuries.  Paul shares a lot of
> inside information as to how the severity of the incident filtered down to
> the teams throughout the race.  Everyone, of course, knew it was a serious
> incident, but just how serious it was came to them in bits and pieces, and
some
> of it not until after the race was over.
>
> The works team did quite well, putting the TR2 on the map.  I was surprised
> to learn of some of the upgrades on the works cars.  I run the number '29'
> on Ole Blue because of the lead TR2 in this race.  That car ran four wheel
> disc brakes (I should upgrade).  The other two TR2s ran disc brakes up
front,
> and one had 10" Alvin drums in the rear.  These TR2s must have run
> overdrive as well, as they were hitting 120 mph on the front straight.
Impressive.
>
> Bill Dentinger
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/billb@bnj.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums


<Prev in Thread] Current Thread [Next in Thread>