fot
[Top] [All Lists]

[Fot] Trunion seals

To: "Friends" <fot@autox.team.net>
Subject: [Fot] Trunion seals
From: "Charly Mitchel" <charly@mitchelplumbing.com>
Date: Sat, 29 Jan 2011 08:21:41 -0800
Good day all,
I'm rebuilding my TR6 front suspension and I've got all the bushings and for
the inner joints and I'm looking for a solution to the trunion pivot seal
parts.  The stock system consists of a distance tube, a nylon bushing, a flat
washer, a 'o' ring and a cupped washer on each side of the lower wishbone arm.
The equates to 18 pieces to make up this seal/joint.  I don't see a trunion
bushing/seal kit available from the major suppliers, i.e. Moss, VB, TRF, BPNW
etc.
Is there a easier better way?  I believe these are the same on all TR's and
Spits and maybe other Triumphs.  What are you guys doing for your racecars?

Charly Mitchel
TR6 #44
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums


<Prev in Thread] Current Thread [Next in Thread>