Yes, it's there. Found it. Says 32 foot pounds.
On May 31, 2017 7:48 PM, "Barr, Scott" <sbarr at mccarty-law.com> wrote:
> Last time I checked, Pauter had a table on its web site that gave rod
> bolt torque and stretch specs. Is it not there anymore?
>
> Scott (B.)
>
>
> Sent from my Verizon, Samsung Galaxy smartphone
>
>
> -------- Original message --------
> From: Peter Vucinic via Fot <fot at autox.team.net>
> Date: 5/31/17 9:31 PM (GMT-06:00)
> To: 'Chuck Arnold and/or Kathleen Kelley' <triosan at gmail.com>
> Cc: 'FOT' <fot at autox.team.net>
> Subject: Re: [Fot] ARP rod bolt torque
>
> Chuck,
> Torque/stretch figures should come with the new bolts?
>
>
> From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of Chuck Arnold
> and/or Kathleen Kelley via Fot
> Sent: Wednesday, 31 May 2017 11:21 AM
> To: Friends
> Subject: [Fot] ARP rod bolt torque
>
>
> This was the hot oil thread. Tore engine down. Nothing in the sump.
> Checked all bearings. All ok. Thrust washers ok, but little clearance.
>
> Now need to torque the ARP rod bolts in the Pauter rods. Looking for help
> as to what is the proper value.
> Thanks,
> Chuck
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20170601/b30035e4/attachment.html>
|