| Subject: | [Healeys] cable |
|---|---|
| From: | phoenix722 at comcast.net (Mike S) |
| Date: | Wed, 14 Jun 2017 12:52:59 -0700 |
| References: | <20170529072128.GB2D6.16325.root@pamxwww02-z01> <7e8a927c-72a2-e522-4035-9c19a2ff99d8@comcast.net> <DC267975-D8DA-443F-ABEA-7535D03A97BF@yahoo.com> <BA6201C2-B9A3-4D68-A247-B003EBE70561@yahoo.com> <becb2c36-512e-2494-fe26-928eaf83bb87@comcast.net> <000001d2dcd5$c57687b0$50639710$@sbcglobal.net> |
Good idea, John. Speedo is now fixed and installed (except I haven't managed to get the high beam light inserted to stay). Thanks to all for your advice. Mike On 6/3/2017 6:56 PM, John Spaur wrote: > Be sure to insert the cable into the speedo and turn it by hand to be > certain the speedo bearing is not frozen. That is usually what causes the > angle drive to fail. > > John > |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [Healeys] Braided steel fuel line for BN7, Bruce Steele |
|---|---|
| Next by Date: | [Fot] 2017 Kastner Cup Guide, Brian Garcia |
| Previous by Thread: | [Healeys] cable, Bob Spidell |
| Next by Thread: | [Fot] Self etching primer applied, Steve Borowski |
| Indexes: | [Date] [Thread] [Top] [All Lists] |