They are shown in my first book The Prep Handbook on page 74.
*Never be beaten by equipment.*
On Tue, Nov 14, 2017 at 5:59 PM, Tony Drews via Fot <fot at autox.team.net>
wrote:
> They are commonly used in the TR-2/3/4 block in place of stock lifters by
> using a sleeve - in this case they are smaller than stock. If you use the
> cam developed by Larry Young you can't use those lifters as he needs the
> full diameter of the stock lifter. The Elgin cams work OK with them though.
>
> I'd not heard of using them in a TR-6 until now though.
>
> Regards, Tony
>
> At 01:02 PM 11/14/2017, Chuck Arnold and/or Kathleen Kelley via Fot wrote:
>
>> Somewhere in a Triumph post I read about using what I think were referred
>> to as GT40 liofters [tappets].? They are slightly larger in diameter than
>> stock TR6 ones.? A set came with my car, but have never been used.? Does
>> anyone know of there and the modification [or where I might have read about
>> them?].? Also, they are for sale.
>>
>> Thanks,
>>
>> Chuck
>> _______________________________________________
>> fot at autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: http://autox.team.net/mailman/
>> options/fot/tony at tonydrews.com
>>
>
>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/fot/kaskastner at gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20171114/edea3da0/attachment.html>
|