fot
[Top] [All Lists]

[Fot] "GT40" lifters

Subject: [Fot] "GT40" lifters
From: rjl at gt-classics.com (R. John Lye)
Date: Wed, 15 Nov 2017 09:38:51 -0500
References: <CAMc4sNCohQ6Oab3aRskiiDtHHUCKo52bUQ8igB-pL08r=nYsOA@mail.gmail.com> <20171115015907.6B4691C0599@relay.mailchannels.net>
Also, Ken Gillanders used to sell them  as a kit with the
sleeves for the TR-2/3/4 block.

John 




On Tue, 14 Nov 2017 19:59:02 -0600, Tony Drews via Fot  wrote:

They are commonly used in the TR-2/3/4 block in 
place of stock lifters by using a sleeve - in 
this case they are smaller than stock.  If you 
use the cam developed by Larry Young you can't 
use those lifters as he needs the full diameter 
of the stock lifter.  The Elgin cams work OK with them though.

I'd not heard of using them in a TR-6 until now though.

Regards, Tony

At 01:02 PM 11/14/2017, Chuck Arnold and/or Kathleen Kelley via Fot wrote:
>Somewhere in a Triumph post I read about using 
>what I think were referred to as GT40 liofters 
>[tappets].?  They are slightly larger in 
>diameter than stock TR6 ones.?  A set came with 
>my car, but have never been used.?  Does anyone 
>know of there and the modification [or where I 
>might have read about them?].?  Also, they are for sale.
>
>Thanks,
>
>Chuck
>_______________________________________________
>fot at autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/fot/tony at tonydrews.com


_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>