Thanks Jim, Why allen heads?
Mark
----- Original Message -----
From: "Bluechipracing" <bluechipracing@snet.net>
To: "Mark and kathy LaPierre" <mgtrcars@galaxyinternet.net>;
<healeys@autox.team.net>
Sent: Tuesday, May 25, 2004 5:44 AM
Subject: Re: Shock Bolt Holes
> I reamed the enlarged holes and used 7/16 bolts. Allen head work best.
>
> Jim
> ----- Original Message -----
> From: "Mark and kathy LaPierre" <mgtrcars@galaxyinternet.net>
> To: <healeys@autox.team.net>
> Sent: Monday, May 24, 2004 11:54 PM
> Subject: Shock Bolt Holes
>
>
> > I sent my shocks out for a rebuild and was informed that the bolt holes
> are
> > larger than they should be in one of the rear shocks. Can I install a
> > sleeve or bushing in these holes and use the same bolts or what other
> ideas
> > can be used.
> >
> > The other option from this rebuilder is to pay a core charge for a
> rebuilt
> > shock cause the body is considered a non reusable.
> >
> > Mark,
> > 58-MGA
> > 60-MGA
> > 76-MGB
> > 74.5-MGBGT
> > 60-BT7
|