Thanks to all who offered their help. (Including he
who's name dare not be mentioned). The solution was
to feed a wire (12 gauge solid electrical wire from
Home Depot) from the steering box end up through the
wheel and using electric tape to tape the end of the
directional wire to the feed wire and pull it back
through the steering box. Worked on the first try!
Rick
--- Alan Schultz <alan@andysnet.net> wrote:
> Rick,
> I use .023 wire from my MIG welder. It is strong
> wire and much thinner
> than coat hanger wire. It worked for me.
>
> Alan S
> 67HBJ8
> Rick Neville wrote:
>
> >--- Rick Neville <healeyrick@yahoo.com> wrote:
> >
> >
> >
> >>Date: Thu, 26 Aug 2004 07:58:38 -0700 (PDT)
> >>From: Rick Neville <healeyrick@yahoo.com>
> >>Subject: Trafficator Help?
> >>To: healeyrs@autox.team.net
> >>
> >>Anyone have any good approaches for threading the
> >>horn/directional wires through the plate at the
> end
> >>of
> >>>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8
|