healeys
[Top] [All Lists]

RE: Air ducts

To: <healeys@Autox.Team.Net>
Subject: RE: Air ducts
From: "Heard" <heard@datatrontech.net>
Date: Sat, 4 Dec 2004 11:40:40 -0500
Yep. This is the end I was referring to.  Looks kind of unfinished compared
to the driver's side.  But who am I to argue....

Thanks to all for your input.

Heard

-----Original Message-----
From: owner-healeys@Autox.Team.Net [mailto:owner-healeys@Autox.Team.Net] On
Behalf Of davidwjones
Sent: Saturday, December 04, 2004 10:27 AM
To: Richard Bittmann; healeys@Autox.Team.Net
Subject: Re: Air ducts 

Marion and Richard,
Where the air hose goes from the fan out to the hole in the cross member
behind the grille, -the hose just mounts in the open hole.
Quaint, aint it?

David W. Jones
'62 Mk II BT7 tricarb
Cumberland, RI USA

  ----- Original Message -----
  From: Richard Bittmann
  To: MBran89793@aol.com ; heard@datatrontech.net ; healeys@Autox.Team.Net
  Sent: Saturday, December 04, 2004 2:01 AM
  Subject: Re: Air ducts


  Marion,
  I think he means the other end, at the front of the car.  I've wondered
the
  same thing.  That is how I found my duct end when I disassembled the car
  last August.

  Richard Bittmann BJ7

  ----- Original Message -----
  From: <MBran89793@aol.com>
  To: <heard@datatrontech.net>; <healeys@autox.team.net>
  Sent: Friday, December 03, 2004 7:09 PM
  Subject: Re: Air ducts


  > In a message dated 12/3/2004 4:58:03 PM Eastern Standard Time,
  > heard@datatrontech.net writes:
  >
  > How does  the heater intake duct
  > terminate?  It appears that I am supposed to  just stick the end of it
  > through the hole in the chassis, but this looks  kinda unfinished
compared
  > to
  > the driver's side if you know what I  mean
  >
  >
  > It starts at the blower assembly passes thru the  bulkhead and then is
  > attached to the heater assembly with a 3  1/4" hose clip, wire type.
  > I hope this helps you.
  >
  > Marion S. Brantley, Jr.




<Prev in Thread] Current Thread [Next in Thread>