healeys
[Top] [All Lists]

Re: seat slides

To: "HealeyList" <healeys@Autox.Team.Net>
Subject: Re: seat slides
From: "Richard Bittmann" <edmyed@harbornet.com>
Date: Thu, 9 Dec 2004 08:23:32 -0800
I just re-checked the location of bolt holes on the chassis and on the seat
frame.  The center to center dimension of the seat frame holes is 13" from
center of round hole to center of slotted hole opposite.  The center to center
of chassis floor holes is still 13 1/8".  The hole diameter is 7/16".

Richard Bittmann BJ7




<Prev in Thread] Current Thread [Next in Thread>