Just remembered that I had made some dimensions for someone else and
still had the info.
http://www.loftusdesign.net/SeatMountDims.jpg
This is what I measured on my BJ7 which appeared to be unmolested on the
frame/floorpanels etc.
Hope it helps.
Cheers,
John
Richard Bittmann wrote:
>I just re-checked the location of bolt holes on the chassis and on the seat
>frame. The center to center dimension of the seat frame holes is 13" from
>center of round hole to center of slotted hole opposite. The center to center
>of chassis floor holes is still 13 1/8". The hole diameter is 7/16".
>
>Richard Bittmann BJ7
|
