Don, I restored mine by removing it, disassembling it, polishing the
bronze pieces with a buffing wheel, replacing the spring, washer & cotter
pin and in now works like new.
Richard Bittmann BJ7
----- Original Message -----
From: "Don" <don@anglesey.us>
To: "Healeys" <healeys@autox.team.net>
Sent: Tuesday, March 15, 2005 11:08 AM
Subject: Heater control tap on block
>I have a small leak coming from the heater control tap located on the
> block. My heater core is bypassed because it has a serious leak so I
> may just block it off anyway but was wondering if I could rebuild it.
> It looks easy enough to take apart but is rather expensive to replace.
> Any recommendations?
> Don
> 57' BN4
|