I used the weather strip from the Nocks, rather than Moss, however, I still
couldn't get it installed using the sliding method. I ended up using a
blunt, straight tip screwdriver to wedge it in. Get one side into the
groove, & then start shoving on the other side from one end to the other.
Still a pain, but it worked, & it didn't damage the rubber.
----- Original Message -----
From: "scott willis" <ahpowered@hotmail.com>
To: <healeys@autox.team.net>
Sent: Thursday, March 24, 2005 9:06 PM
Subject: AAAAAAaRRRrrrrrGggghhhhhHHHHH!
> Moss part 021-774 Side Curtain Weather Stip.
>
> Is this really going to fit in the frame? Has ANYONE had luck getting this
> rubber strip made in Taiwan inserted? The wide bottom side looks like it
> will go but the strip going up the front is very thick for the track.
>
> Should I be trying to slide this in or wedge it in with a tool?
>
> Also should I juts cut it where the track ends or leave some sort of flap?
>
> thanks very much for advice.
>
> Cheers,
> Scott
> Mashed BN7
|