healeys
[Top] [All Lists]

RE: Compression Readings?

To: "'Bob Spidell'" <bspidell@comcast.net>,
Subject: RE: Compression Readings?
From: "Esko and Megan Cate" <ptenmcate@cablespeed.com>
Date: Tue, 11 Oct 2005 14:05:58 -0700
Is 195-200 reasonable for a rebuilt BJ7?

Esko
BJ7

-----Original Message-----
From: owner-healeys@autox.team.net [mailto:owner-healeys@autox.team.net] On
Behalf Of Bob Spidell
Sent: Tuesday, October 11, 2005 7:01 AM
To: R. Cobb; healeys@autox.team.net
Subject: Re: Compression Readings?

R.,


I would expect 175psi give or take, depending on whether the head and/or
block
has been milled, etc.


bs
***************************************************************
Bob Spidell         San Jose, CA        bspidell@comcast.net
'67 Austin-Healey 3000             '56 Austin-Healey 100M
***************************************************************

Subject: Compression Readings?


> On a newly-rebuilt BJ8 engine with about 1500 miles on it, what would 
> typical good compression readings be?
> 
> Thanks.
> R. Cobb




<Prev in Thread] Current Thread [Next in Thread>