Also correct for BJ7 / BJ8.
Earl Kagna
Victoria, B.C.
BT7 tri-carb
BJ8
----- Original Message -----
From: "John Snyder" <helyjohn@cablespeed.com>
To: "Ned Smith" <smithn00@kitepilot.net>; "Austin-Healey List"
<healeys@autox.team.net>
Sent: Friday, November 04, 2005 7:01 PM
Subject: Re: Seat Slides
While I don't know about a BJ8, they are certainly correct for a BN7/BT7.
John Snyder
Subject: Seat Slides
>I removed the passenger side seat and slides today. They were totally
> inoperative. Under each slide I found things that are not in the parts
> list:
>
> A wood slat about 1 1/8" x 15"x5/16".
>
> A metal piece about 2x16x1/16.
> The wood ant the metal were badly distorted and rusted. Are these standard
> parts?
Ned Smith
> BJ8
|