Care to share the sources with us? Inquiring minds would like to know.
Thanks, Mark
----- Original Message -----
From: "Ron Fine" <RonFineEsq@earthlink.net>
To: "Ned Smith" <smithn00@kitepilot.net>; "Austin-Healey List"
<healeys@autox.team.net>
Sent: Saturday, November 26, 2005 12:55 PM
Subject: RE: Putting the Channels Back on the Window Glass
> Be sure you have the correct thickness of rubber glazing for your window
> glass. When I removed my original glass from the channels to get them
> re-chromed the original rubber was very thin. When I ordered new rubber I
> received a much thicker rubber. I tried several sources for a thinner
> rubber and tried using one that was just a little thicker than the
> original
> but I ended up with a cracked windshield (one week after it was installed
> the stress crack started at one edge and slowly moved across the glass
> over
> a few days). I finally located a source for a very thin rubber glazing
> material which was comparatively easy to install and so far, no cracks
> (three weeks)
> Ron
> BN7
>
> -----Original Message-----
> From: owner-healeys@autox.team.net
> [mailto:owner-healeys@autox.team.net]On Behalf Of Ned Smith
> Sent: Saturday, November 26, 2005 9:05 AM
|