Graham -
I haven't used them personally, but I have heard many people on the list
recommend Joe Curto:
http://www.joecurto.com/
That being said, HD8s are very easy to rebuild yourself, because it uses
nylon/teflon bushes and as long as you replace these (they can be replaced
by hand/without a press... you can get the bushes from Norman Nock), your
carbs will work like new. Shafts and rebuild kits are available from Norman
Nock too....
Best Regards,
Alan
'53 BN1 '64 BJ8
On 12/5/05, GLWilkieAlaska@aol.com <GLWilkieAlaska@aol.com> wrote:
>
> Hi Listers,
>
> As a result of an ongoing project to replace the exhaust system on my BJ8,
> I
> now have my SU (HD8) carburetors sitting on the workbench. (It's along and
> sad
> story how one is associated with the other.) Now that the carburetors are
> off, I thought now would be a good time to get them rebuilt, throttle
> shafts
> checked, etc. It is difficult to choose from the advertisers who offer
> this
> rebuild service. If anyone could point me in the direction of an SU
> carburetor
> rebuilder who is reputable in the Healey community, I would be most
> grateful.
>
> Regards,
>
> Graham Wilkie.
> HBJ8L / 32382
|