healeys
[Top] [All Lists]

Re: BJ8 Wheel Alignment

To: "Bob Spidell" <bspidell@comcast.net>,
Subject: Re: BJ8 Wheel Alignment
From: "Rich C" <richchrysler@quickclic.net>
Date: Thu, 8 Dec 2005 10:20:05 -0500
Ned,
Before you go any further, check the degree of toe in. As a wheel is turned 
outboard the top will lean out, while the wheel turning inboard will have 
the wheel lean in.
With the toe in set wrong it's amazing how much negative camber can be seen. 
This is not an uncommon thing to see and can be adjusted easily with the 
effective legth of the tie bar across the front.
Rich Chrysler


<Prev in Thread] Current Thread [Next in Thread>