Chris,
The hubs are perfectly true and only a couple of years old--the ends were
turned on a lathe as part of the manufacturing process and there's nothing
rough about them. I didn't see anything move when I was hammering off the
knockoffs.
At some point, I'm going to put the car in the street where I can push it
back and forth and repeat the process.
Steve
> From: "Chris Masucci"
>
> Are you sure that the rough machined end of the hub is perpendicular to the
> wheels, that they are all the same and nothing moved even a little removing
> the knockoffs?
>
> Cheers,
> Chris
> BJ8
|