I used long clamps to draw the pieces together.
Ned Smith
BJ8
near Chattanooga, TN
N34.98 W85.5
-----Original Message-----
From: pennell@cox.net [mailto:pennell@cox.net]
Sent: Tuesday, May 23, 2006 8:20 PM
To: 'Freese, Ken'; Ned Smith; healeys@autox.team.net
Subject: RE: BJ8 window rail
Ken and Ned,
I would add that it may require some tapping with a rubber mallet or wood
block and hammer.
Keith Pennell
---- Ned Smith <smithn00@kitepilot.net> wrote:
> Yes.
>
> Ned Smith
> BJ8
> near Chattanooga, TN
> N34.98 W85.5
>
> -----Original Message-----
> From: owner-healeys@autox.team.net [mailto:owner-healeys@autox.team.net]
On
> Behalf Of Freese, Ken
> Sent: Tuesday, May 23, 2006 7:08 PM
> To: healeys@autox.team.net
> Subject: BJ8 window rail
>
> The bottom rail that holds the roller has come off the window frame.
> Should I line the rail with a thin rubber sheet and then push it back on
> to the window frame?
> Ken Freese
> 65 BJ8
|