My workshop manual on CD was produced by Haynes so no copywrite problems
there.
John Sims, BN6
Aberdeen, NJ
www.healey6.com
-----Original Message-----
From: owner-healeys@autox.team.net [mailto:owner-healeys@autox.team.net] On
Behalf Of Patton Dickson
Sent: Thursday, September 14, 2006 7:45 PM
To: dcong996@earthlink.net
Cc: healeys@autox.team.net; Tom Williams
Subject: Re: Workshop manual
Aren't there copyright concerns on these, especially with Haynes as
they are still in business.
I could scan the entire factory manual to pd with the copier I have
at the office if copyrights aren't and issue.
Patton
On 9/14/06, dcong996@earthlink.net <dcong996@earthlink.net> wrote:
> I have a copy that I bought on disk, which is PDF format, about 110,000
KB.
> It is a copy of the Haynes Manual 1974 reprint.
> It covers all 100-6 and all 3000 models. It is very similar to the factory
> manual. Convenient to use on the computer and to print individual pages or
> drawings to use in the shop.
> I paid about $10 for the disc on eBay, and it is well worth it.
>
> Dallas
> 1967 BJ8
> 1953 MGTD
|