Healey Surgeons sells them.
> [Original Message]
> From: Mark Goodman <mkgoodman@worldnet.att.net>
> To: Gale Hess <ghess4@cox.net>
> Cc: Healeys@Autox. Team. Net <healeys@autox.team.net>
> Date: 2/12/2007 10:35:00 AM
> Subject: MANIFOLD DRAIN LINE
>
> Dear Gale,
>
>
>
> Go to a good local hardware store or hobby shop to get the tubing to fit
> into your fitting. I believe that it is 1/16 inch tubing and you can get
a
> 12 inch length of brass tubing to fit the connection. The Fitting is a
> compression fitting that is standard in the AC/heating equipment and you
can
> find that at a supply house for contactors. If you have a problem, I have
> both items that I have extra's from when I redid mine.
>
>
>
> Mark Goodman
>
> 66 BJ8 35503
>
>
>
> Date: Sun, 11 Feb 2007 19:01:59 -0800
>
> From: "Gale Hess" <ghess4@cox.net>
>
> Subject: Manifold Drain-Intake
>
>
>
> Hello to you all who have so graciously helped me on several questions in
> the
>
> past.
>
>
>
> My BJ8 has a rear intake manifold drain which has had the tube removed by
>
> previous owner due to interference with an exhaust header pipe. The
fitting
>
> is still open and I think that it represents a fire hazard since it drops
> raw
>
> fuel on to the hot header pipe. Do any of you have experience with
> operation
>
> after blocking the Drain pipe or pipes?
>
> I will appreciate your comments.
>
> G. Hess
|