Linwood,
The several doors i have seen seem to use a dum dum sort of material. That is
what I used in the reassembly of my BN7.
Keith Pennell
> Rich,
> I have plenty of email saved on the issue of dum-dum or 3M caulking
> material between the shrouds and the wings. However, I don't have any
> info about the aluminum finish strips on the top of the doors for the
> roadsters. I know my car did have some type of caulking material
> because it was stuck to the aluminum when I took the trim off. Any
> recommendations on what to use in this instance?
>
> Thanks,
>
> Lin Rose
> 1960 BT7 in restoration
> 1959 Bugeye
> _______________________________________________
> pennell@cox.net
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|