healeys
[Top] [All Lists]

Re: [Healeys] Stator Tube & Trafficator Question

To: <AAHealeyguy@aol.com>, <healeys@autox.team.net>
Subject: Re: [Healeys] Stator Tube & Trafficator Question
From: "Rich C" <richchrysler@quickclic.net>
Date: Mon, 24 Sep 2007 00:12:57 -0400
Gerry,

Sounds like the stator tube is too short for some reason. If its whole, it 
should stick out throught he steering box about 1 1/2", the olive (or 
ferrule) should slide over it and push up to the end of the external thread 
on the box and the nut lock everything into place.

Rich Chrysler

----- Original Message ----- 
From: <AAHealeyguy@aol.com>
To: <healeys@autox.team.net>
Sent: Sunday, September 23, 2007 9:41 PM
Subject: [Healeys] Stator Tube & Trafficator Question


> Hi gang,   I have a 1957 100/6 BN4 and recently rebuilt the trafficator 
> and
> replaced it into the steering cloumn.   My problem is re-installing the 
> olive
> on the stator tube at the other end of the steering column.   Is the 
> stator
> tube supposed to stick out of the end plate nipple just a litte, so that I 
> can
> insert the olive onto it??  It does not on mine.
> I installed the olive into the nipple hole (that the stator tube was not
> sticking out of) then installed and tightened the nut...... and 
> munched/crushed
> the olive.  Had to buy a new one.
> I was told that I need to install the olive onto the end of the stator 
> tube.
> I cannot seem to get the stator tube to protrude out the end of the end 
> plate
> nipple.   Any suggestions or what might I be doing wrong.     And  YES my
> steering box oil just pours out.
>
> Thanks for any input.
> Gerry K (in San Diego)
>
>
> **************************************
> See what's
> new at http://www.aol.com
> _______________________________________________
> richchrysler@quickclic.net
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
_______________________________________________

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

<Prev in Thread] Current Thread [Next in Thread>