IIRC, the little clips go under the lip on the inside of the doors. I have
made a "clip installer" in which the clip "sits". the installer is then
lowewred throught the window opening and positioned under the lip and the
weather strip. Pulling up sharply on the installer attaches the clip over
the lip and strip. Works well. I don't have a photo, but think of a long
strip of metal with a handle on one end and a "U" shape on the other. The
clip sits in the "U" end of the metal.
Easy to make.
tom
> [Original Message]
> From: T W <ah3000me@gmail.com>
> To: <Healeys@autox.team.net>
> Date: 9/25/2007 7:40:06 PM
> Subject: [Healeys] BJ8 door - glass weather strip
>
> Hi,
>
> I need to replace the inner and outer weather strips in the door of my
> BJ8 (1966). These are the strips that seal against the glass as it
> goes up and down in the door.
>
> Does anyone have some advice on how best to do this? The outer
> doesn't look too bad to do, but the replacing the inner strip looks
> tricky.
>
> thanks in advance,
>
> Tom
> _______________________________________________
> tomfelts@earthlink.net
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|