healeys
[Top] [All Lists]

Re: [Healeys] Carb jet tube clearance

To: Daniel and Diane White <dwhite4949@wowway.com>, Healeys at Autox
Subject: Re: [Healeys] Carb jet tube clearance
From: Dave Schweninger <quenty@ntelos.net>
Date: Wed, 26 Sep 2007 14:24:42 -0400
[demime 1.01d removed an attachment of type image/jpeg which had a name of 
DSCN2701.jpg]
Dan
I also have a 62 BN7 Tri-carb
My rear carb jet head is inside the steering column about 1/4". With  
no Choke, the bottom of the jet is about 3/16 above the CL of the  
column. The attached pic. shows the Carb balance tube's alignment  
with the OD throttle Switch. If thats OK It must be the stack up of  
gaskets. spacers. heatshield.etc. All this is assuming mine is correct.
Good Luck
Dave and Daisy

[demime 1.01d removed an attachment of type image/jpeg which had a name of 
DSCN2700.jpg]
_______________________________________________

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

<Prev in Thread] Current Thread [Next in Thread>