Take any old valve, intake or exhaust, heat the stem and bend it 90 degrees.
Put the stem through one of the holes in the engine plate and the head into
one of the slots on the ring gear. Voila! Richard Mayor
> Date: Tue, 9 Oct 2007 21:24:58 -0400> To: healeys@autox.team.net> From:
s.hutchings@rogers.com> Subject: [Healeys] Undoing the crank nut> > With the
engine out of the car, it's a bit of a challenge to undo the > crank nut
without the engine turning- I'm thinking of making a > bracket that would hold
the clutch to the back plate, but my friend > has offered to come by with air
tools. Anyone have another trick for > this if I get impatient?> > Stephen,
BJ8> _______________________________________________> mayorrichard@hotmail.com
> > Healeys@autox.team.net> http://autox.team.net/mailman/listinfo/healeys
_________________________________________________________________
Boo! Scare away worms, viruses and so much more! Try Windows Live OneCare!
http://onecare.live.com/standard/en-us/purchase/trial.aspx?s_cid=wl_hotmailne
ws
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|