Not if you use a really big sledge hammer to knock it out.
On 10/10/07, Stephen Hutchings <s.hutchings@rogers.com> wrote:
> I think I've noticed another error in the Haynes manual; my reading
> of the cam removal procedure in the workshop manual starts with the
> removal of the sump and oil pump, and goes on to mention the timing
> gears, distributor drive etc. But the Haynes manual doesn't mention
> the oil pump- Surely, one must disengage the oil pump before being
> able to withdraw the camshaft?
>
> Stephen, BJ8
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|