healeys
[Top] [All Lists]

[Healeys] BJ8 cam install questions

To: healeys@autox.team.net
Subject: [Healeys] BJ8 cam install questions
From: Gbouff1@aol.com
Date: Wed, 26 Dec 2007 13:08:09 EST
I am thinking about re-grinding my MK1 camshaft to the BJ8 specs when I  
rebuild my engine but I want to keep the rest of the engine as original as  
possible. My questions are as follows.
 
The car is intended for spirited street use.  The MK1 cam is rated at  2700 
rpms for max torque while the BJ8 cam is rated max torque at 3000  rpms.  Will 
there be any significant improvement or decrease in the seat of  the pants 
feel of acceleration?  If there is no apparent difference I may  not bother 
with 
a new grind.
 
Can the original distributor curve be adjusted or modified to the  newer BJ8 
distributor curve?
 
I intend to keep the 1 3/4 carbs, will the BJ8 cam cause the engine to  
starve for air towards max RPMs?
 
Happy Holidays!
 
Thanks in advance for any input.
 
Gary Bouffard
1960 BN7 (aka garage clutter)
 
 



**************************************See AOL's top rated recipes 
(http://food.aol.com/top-rated-recipes?NCID=aoltop00030000000004)
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>
  • [Healeys] BJ8 cam install questions, Gbouff1 <=