healeys
[Top] [All Lists]

Re: [Healeys] Transmission OD - 22% vs 28%

To: "WILLIAM B LAWRENCE" <ynotink@msn.com>, <wilko2@cox.net>,
Subject: Re: [Healeys] Transmission OD - 22% vs 28%
From: "Rich C" <richchrysler@quickclic.net>
Date: Thu, 21 Feb 2008 20:40:40 -0500
Bill,

 If you change out those sun/planetary gears, send me the 28% set!

Seriously, to answer your question you need to ask yourself if greatly 
relaxed RPM's at highway speeds is important to you (the 28% ratio), or do 
you want a higher revving engine at highway speeds (the 22% ratio). Unless 
you want a sprint car for tight track work and faster mid range 
acceleration, I'd leave everything alone as you have it.

Rich Chrysler

----- Original Message ----- 
From: "WILLIAM B LAWRENCE" <ynotink@msn.com>
To: <wilko2@cox.net>; <healeys@autox.team.net>
Sent: Thursday, February 21, 2008 7:41 PM
Subject: Re: [Healeys] Transmission OD - 22% vs 28%


>I also run the 3.54/.28 set up in my BN1 and I'm very happy with it except
> for one quibble. The BN1 transmission coupled with the .28 overdrive ratio
> gives me two gear ratios (2 over and 3 under) that are nearly identical. 
> The
> math says the .22 ratio would move the ratios apart slightly and possibly
> provide another usable gear ratio. I'm wondering if changing to a .22 
> would
> be worth the effort. Any opinions?
>
> Bill Lawrence
>
>
>>From: "Eric (Rick) Wilkins" <wilko2@cox.net>
>>To: healeylist List <healeys@autox.team.net>
>>Subject: Re: [Healeys] Transmission OD - 22% vs 28%
>>Date: Thu, 21 Feb 2008 10:47:29 -0800
>>
>>I've also got the 28% with 3.54:1 rear end.
>>
>>Perfect for driving at modern freeway speeds.
>>
>>I have a chart at my website, too. Has a few popular tire and gear
>>combos showing speed/RPM all over the ranges:
>>
>>http://www.ewilkins.com/wilko/healeygears.htm
>>
>>Wilko
>>
>>On Feb 21, 2008, at 7:11 AM, John H wrote:
>>
>> > Listers,
>> >
>> > I am swapping tranmissions in my BN7.  One coming out is a 22% side
>> > shift.  The one going in is a 28% side shift and just rebuilt.
>> > Bundled with my 3.54 Lempert gear set should give me great cruising
>> > capabilities on demand.
>> >
>> > Question:  the 22% has an enclosed area with a removable cover where
>> > the solenoid shaft engages and disengages the OD (to keep debris and
>> > moisture out, I assume)  The 28% does not have this enclosure
>> > leaving it exposed to debris and moisture.
>> >
>> > The parts manual shows only a metal deflector (called a stone gaurd)
>> > in front of the solenoid.  Is this correct? and is there a way to
>> > convert to the enclosed version, which seems safer in the long run?
>> >
>> > Thanks in advance,
>> >
>> > John Homonek
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler@quickclic.net
>
> http://www.team.net/archive 
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>