Hi Steven,
I'll help you, and I need you to help me.
Re the frosted lens....simply remove the lens and have it carefully blasted
on the inside surface with soda or fine sand. A local friend who did frosted
designs on glass mugs did some for me and it worked perfectly. That's all
the originals are.
Now, you can help me....I see I do not have you or your car listed on the
Hundred Registry. Could you please send me all the numbers of your car;
chassis, batch and body, engine, and colours exterior and interior,
basically everything stated on the BMIHT certificate so we can enter it on
the Hundred Registry. I then also need your personal contact info along with
any known history of the car, previous owners, etc.
Many thanks
Rich Chrysler
AHCA Hundred Registrar
----- Original Message -----
From: <ATIGHTPROD@aol.com>
To: <healeys@autox.team.net>
Sent: Friday, March 28, 2008 4:47 PM
Subject: [Healeys] Frosted lens cover
> This is one of my first times out here and I'm looking for a lens cover. I
> have a BN1, built 29 October 1953, number 598. The front lenses for the
> turn
> signal light should be frosted and not clear from what I understand, I
> have one
> frosted, one clear. Does anyone have one frosted one available? Thanks in
> advance for any response.
>
> Steven Kingsbury
> BN1
>
>
>
> **************Create a Home Theater Like the Pros. Watch the video on AOL
> Home.
>
>(http://home.aol.com/diy/home-improvement-eric-stromer?video=15&ncid=aolhom00030000000001)
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler@quickclic.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|