All,
A few months ago I asked the question about rear discs to fit the
conversion as sold by Cape/ Welch/SC Prts. After much searching of
catalogues I have discovered that the front disc from a BMW 318i (E36) is
pretty close. A local firm is machining a set for me with the correct bolt
holes and centre hole and reducing the overall diameter slightly. The total
cost for a pair of discs is AUS$210 including supply of the original discs
and the machining work. If anybody is interested in going down this path I
can either supply a set here or pass on the model number of the disc and the
required machining sizes,
Cheers
Pieter
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|