healeys
[Top] [All Lists]

Re: [Healeys] Rotors - it happened ....

To: "Dan" <jobu53@hotmail.com>,
Subject: Re: [Healeys] Rotors - it happened ....
From: price@advocateadvisors.com
Date: Thu, 28 Aug 2008 20:53:41 +0000
Wouldn't you think someone would make quality rotor that would accomodate the 
dimentions of an electronic ignition without having to go to your shop and 
grind it?
------Original Message------
From: Dan
Sender: healeys-bounces+price=advocateadvisors.com@autox.team.net
To: healeys@autox.team.net
Sent: Aug 28, 2008 2:38 PM
Subject: Re: [Healeys] Rotors - it happened ....

If you are using a Pertronix system, you need to grind down the rotor so it
sits farther down on the shaft. I have seen a few dizzy's where rotors were
not taken down and there is a lot of black dust inside the dizzy. I saw one
where the center electrode was completely worn away. Dan Serrao1963 BJ7
_________________________________________________________________
Get ideas on sharing photos from people like you.  Find new ways to share.
http://www.windowslive.com/explore/photogallery/posts?ocid=TXT_TAGLM_WL_Photo
_Gallery_082008
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

You are subscribed as price@advocateadvisors.com

http://www.team.net/archive


Sent via BlackBerry by AT&T
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>