Bob,
See my reply to Lin Rose on the newsgroup for standoff reasoning.
On my website is another gallery showing the original modification of the
K&N filter.
Basically I swapped the outside plates to the inside and on the rear moved
the hole down all the way against the filter. I blanked the outside holes
where you can't see them with pieces of aluminum pie plate.
--
Steve Gerow
Pasadena CA
59 BN6
> From: Bob Spidell <bspidell@comcast.net>
> Date: Wed, 10 Sep 2008 06:00:36 -0700
> To: "Steve B. Gerow" <steveg@abrazosdata.com>
> Subject: Re: [Healeys] Photos of HD8 DMD installation
>
> Hi Steve,
>
> Why did you need the standoff for the rear carb (very clever, BTW ;)?
>
> Did you find air cleaners--look like K&N--with the holes cut offset, or
> do it yourself?
>
> Thanks,
>
>
> bs
>
> Steve B. Gerow wrote:
>> Have uploaded photos of my revised DMD installation--moving from HD6s to
>> HD8s.
>>
>> http://www.pbase.com/stevegerow/dmd2inch
>>
>> no passwords reqired
>>
>>
>
>
> --
> *******************************************************************
> Bob Spidell San Jose, CA bspidell@comcast.net
> *******************************************************************
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|