healeys
[Top] [All Lists]

Re: [Healeys] Wood spacer strips

To: Jim Lyons <jlyons4@rochester.rr.com>, Mirek and Gwen Sharp
Subject: Re: [Healeys] Wood spacer strips
From: <pennell@cox.net>
Date: Sun, 21 Sep 2008 15:27:44 -0400
Mirek and all,

The two sets I have made and installed were of oak because that is the hardwood 
which I had on hand.  I rubbed them down with 2 coats of tung oil because that 
is also what I had on hand.

Keith Pennell

> Jim,
> 
> I suspect the wood strips were oiled, not finished in a hard finish like a 
> varnish.  Probably they used linseed oil  - whatever was left over after the 
> cricket bats were oiled!
> 
> I recently installed new ones and used tung oil and they looked fine and are 
> preserved.  > cheers,  Mirek
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>