Hello Thomas; Perhaps the following discussion from my archives ot late 2005
will help. I suggest you contact "Freese, Ken" <Kendall.Freese@Aerojet.com>
and/or "Bruce Leslie" <bruce@forkman.co.za>
--Scott Morris; Simcoe, Ontario, Canada; '60 MkI BN7 & '62 MkII BT7
100S OIL COOLER
To: "'Bruce'" <bruce@forkman.co.za>, Healey Info <healeys@autox.team.net>
Subject: RE: 100S OIL COOLER
From: "Freese, Ken" <Kendall.Freese@Aerojet.com>
Date: Tue, 11 Oct 2005 14:12:41 -0700
I have the factory drawing. I believe there are also reproductions available.
It was a somewhat simple casting.
--Ken Freese
-----Original Message-----
>From : owner-healeys@autox.team.net On Behalf Of Bruce
Sent : Tuesday, October 11, 2005 6:15 AM
To : Healey Info
Subject : 100S OIL COOLER
Hi All; Does anyone have the dimensions for a 100S oil cooler. A photo with
dimensions would be a great help.
Regards, --Bruce Leslie Pretoria South Africa
*****************************************************************************
************************
--- On Mon, 9/29/08, Thomas Willig <twillig@ruda.de> wrote: << Hello, I am
aware that this question was posted before, but somehow I can not find the
answer to it. Therefore here is the question again: Does anyone makes
reproduction oil coolers for the 100S? if nobody makes them then: Does
anybody have drawings/close-ups/dimensions of this oil cooler. >>
__________________________________________________________________
Instant
Messaging, free SMS, sharing photos and more... Try the new Yahoo! Canada
Messenger at http://ca.beta.messenger.yahoo.com/
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|