Someone from Oz had asked me if it was possible to remove the dome on my
front HD8 with the DMD manifold, to which I had replied--No it's not--the
carb is partially under the fender due to the 1/2" thick insulating blocks.
FYI--the XKE uses a 1/8" insulating spacer which will move the carbs in
enough to make the front dome clear the fender opening.
I got mine from Joe Curto, but they're likely available from any of the SU
suppliers.
--
Steve Gerow
Pasadena CA
59 BN6
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|