Ron -
Most glues won't be strong enough to keep this together. I think the best
you can hope for is to purchase some JB Weld and use that, it's pretty much
the strongest adhesive out there.
By the way, you don't want to paint the trafficator. You will get better
long term results if you dye it using India ink then polish it with car wax.
Alan
'52 A90
'53 BN1
'64 BJ8
On Wed, Dec 17, 2008 at 2:05 PM, Ronald Corazzo <roncorazzo02@yahoo.com>wrote:
> Back ground;
> Had my traficator gone through and rewired. Cleaned up the bakelite and
> plastic horn center myself. Unfortunately I did not re -chrome the turn
> signal
> at that time. I decided to take it apart and get the turn signal re
> chromed.
> Removed the plastic and paper protecting it and the bakelite part of the
> traficator was broken in peaces. I glued it together with supper
> glue(gel).
> I had model glue but that does not dry fast enough. I Used the model
> glue
> on one of the tabs that broke off on the horn part.
>
> My question is I would like it reinforced so it wonb t fall apart after
> prime
> it and getting it painted. Any ideas?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|