I think you meant clutch disk that the alignment tool is for.
-----Original Message-----
From: healeys-bounces@autox.team.net
[mailto:healeys-bounces@autox.team.net]On Behalf Of Alex
Sent: Wednesday, December 31, 2008 8:46 AM
To: scott willis; lapierrem@sbcglobal.net; healeys@autox.team.net
Subject: Re: [Healeys] Re-installing Tranny?
The alignment tool was to center the pressure plate. It fit in the pilot
bearing.
== Alex
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|