Do away with the lock washer and use locktide.
Kees Oudesluijs
Jorge Garcia schreef:
> I spent the afternoon tinkering with the starter and got it clocked so that
>it cleared the passenger toe box and the engine block. The top bolt no problem
>but the bottom bolt not so good there is very little room for the nut to fit
>between the starter motor and and the mounting tab. I should clarify that the
>nut will just fit but not the nut and the lock washer. I am thinking of
>finding a thinner nut that will fit with the lock washer. Any ideas
>suggestions would be greatly apprciated.
> Jorge Garcia
> 1965 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as coudesluijs@chello.nl
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|