[Healeys] Fw: BJ8 Phase 1 Cubby Box

["Rich C" <richchrysler@quickclic.net>]

Hello all,

I got some great replies regarding the anchoring of the cubby box on the 
Phase 1 BJ8's. Thanks especially to Richard Gordon and John Vrugtman. This 
list really does work wonders at times.

For everyone's information the hold down screw c/w raised cup style trim 
washer is installed from the interior of the box liner as it passes right 
through the hardboard liner, through the 90 degree tabbed steel bracket, 
through the carpet and into the top centre of the tunnel.

Rich Chrysler

[demime 1.01d removed an attachment of type image/jpeg which had a name of 
IMG_2945.JPG]

[demime 1.01d removed an attachment of type image/jpeg which had a name of 
IMG_2944.JPG]
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive