On the Technical Page of my site scheduled for update Friday morning.
John Sims, BN6
Aberdeen, NJ
www.healey6.com
-----Original Message-----
From: Rich C [mailto:richchrysler@quickclic.net]
Sent: Thursday, March 19, 2009 12:29 AM
To: healeylist; Bob Spidell
Cc: John Sims
Subject: Re: [Healeys] Location of flasher unit on BN2 ...
Bob,
The flasher can on a BN2 mounts inside the car and has a mounting tab on the
top which fastens over the end of a 1/4" NF machine screw whose head is in
the engine bay, the shank is inside the car. The wires come from the main
harness in the engine bay, through the same grommet as the 3 wiper motor
wires, arriving right adjacent to the base terminals of the flasher can.
It's a whole lot easier to install all this stuff before the front shroud is
final fitted to the car. Picture att'd of original BN2 showing undisturbed
details before dismantling. Shroud has just been removed.
Rich Chrysler
----- Original Message -----
From: "Bob Spidell" <bspidell@comcast.net>
To: "healeylist" <healeys@autox.team.net>
Sent: Wednesday, March 18, 2009 11:52 PM
Subject: [Healeys] Location of flasher unit on BN2 ...
> ... inside or outside of firewall, and attached to?
>
> TIA,
> Bob
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|