healeys
[Top] [All Lists]

Re: [Healeys] Lockheed, Is this an MG part?

To: "'Rich C'" <richchrysler@quickclic.net>, "'richard mayor'"
Subject: Re: [Healeys] Lockheed, Is this an MG part?
From: "Patrick and Caroline Quinn" <p_cquinn@tpg.com.au>
Date: Mon, 30 Mar 2009 06:57:53 +1100
G'day Rich

Yes real Healeys were in production between 1946 and 1954. 

The DHMC must have been a busy place between 1952 and 1954 with the first
Austin-Healey 100s were being built/readied for competition alongside both
the Nash Healey, Tickfords and Abbotts.

The very last real Healey was the SR built for Le Mans in 1968 & '69 as a
coupe and then made into a roadster for 1970.

For the sake of the Healey History I believe it's important to remember the
cars before the Austin-Healeys.

While Austin-Healeys were fitted with Girling products (100S excluded)real
Healeys were equipped with Lockheed brake components.

Hoo Roo

Patrick Quinn
Sydney, Australia 

-----Original Message-----
From: Rich C [mailto:richchrysler@quickclic.net] 
Sent: Monday, 30 March 2009 12:45 AM
To: Patrick and Caroline Quinn; 'richard mayor'; 'healeys'
Subject: Re: [Healeys] Lockheed, Is this an MG part?

Pat,

You're very bad! <grin>

"Real Healeys" in this case translates to Healey automotive products other 
than and prior to the Austin Healey.

All production Austin Healeys (other than Sprites) were fitted with Girling 
products. I don't have any Lockheed cross reference material here but for 
the six cylinder cars, the master cylinder bore was 5/8" except for the 
later servo quipped cars where the master cylinder bore is 7/8".

Rich Chrysler

----- Original Message ----- 
From: "Patrick and Caroline Quinn" <p_cquinn@tpg.com.au>
To: "'richard mayor'" <mayorrichard@hotmail.com>; "'healeys'" 
<healeys@autox.team.net>
Sent: Saturday, March 28, 2009 9:09 PM
Subject: Re: [Healeys] Lockheed, Is this an MG part?


> G'day Richard
>
> Real Healeys were fitted with Lockheed braking systems. Is it possible to
> send me an image of the master cylinder please?
>
> Hoo Roo
>
> Patrick Quinn
> Sydney, Australia
>
> -----Original Message-----
> From: healeys-bounces@autox.team.net 
> [mailto:healeys-bounces@autox.team.net]
> On Behalf Of richard mayor
> Sent: Sunday, 29 March 2009 4:12 AM
> To: healeys
> Subject: [Healeys] Lockheed, Is this an MG part?
>
> Sorry to bother you guys with a non Healey question.  I acquired this part
> along with some Healey stuff. It is an NOS Lockheed master cylinder 3/4 
> inch
> bore. Part #112625. Anyone know what kind of car this part belongs to?
> Thanks, Richard
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>